RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only

Specifications	Accuracy
Detection method	Hall element
Measurement range	1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with an output waveform duty cycle 50%±20%)
Detection gear	Strong magnetic materials
Gap between detector and gear	(modulus 0.5~3, tooth width 3 mm or greater)
Power supply used	DC 12V±2V(0.5Vp-p or less ripple)
Current consumption	40mA or less(12V, at 25℃)
Output waveform	Lew level;±0.5V rectangular waveform(With no loac)
Output impedance	Approx. 330Ω
Output type	Floating groung
Protective circuit	Power supply polarity and output short protection
Operating temperature range	-10℃~+70℃
Storage temperature range	-20℃~+80℃
Matching connector	6-pin connector(type R04-PB6F plug)
Allowable vibration	double-ended 1.2mm at 30㎐ in X, Y and Z direction
(during-operation)	for one hour each
Allowable shock(non-operating)	490m/s2 in X and Y direction each 3 times
Withstand voltage	1. DC250V, 1min.(between shield and signal cable) 2. DC250V, 1min.(between shield and sensor head
Interface indicator	DN-30
Weight	Approx. 80g(including two mounting nuts)
Accessories	Mounting nuts(2)

RS-025

Product Specifications